Self Adjusting Interior Skirting
Self Adjusting skirting rides the belt to create an effective seal automatically, and requires only six inches (152 mm) of clearance and only 1.5 inches (38 mm) free belt area for sealing. L System has an inward extension under the skirtboard to increase the range of tolerance for belt mistracking.
Features and Benefits:
- System rides on belt, self-adjusting to maintain effective seal automatically as belt path fluctuates and sealing strip wears
- Provides effective seal on conveyors where chute width leaves as little as 1.25 inches (32 mm) of free belt area for sealing
- Low-profile skirting assembly needs only six inches (152 mm) of clearance, allowing installation in small spaces
- Short 48-inch (1219-mm) clamp sections with built-in plugweld guides simplify installation
- Durable sealing strip provides 2-inch (51-mm) wear life. Zinc-plated moving parts will not seize or rust together.
- Held in place with linchpins, replacement of the worn sealing strip is a quick, easy, no-tool operation. No spillage at joints in sealing strip; rubber strip supplied in continuous lengths up to 100 feet (30.48 m).
Our technicians and engineers are available to provide expert advice and assistance on this product and all of your bulk material handling questions and problems. Please contact us today and let us help!
We Solved Their Problems!
Let us help you solve yours as well. All products and services provided by Martin Engineering carry our Absolutely No Excuses Guarantee. If we don't solve your problem, we will fully refund your money or provide a different solution for you. Period.
Belt Sealing Products Reduce Cleanup and Maintenance Costs
Located on the Ohio River, the Mt. Vernon Transfer Terminal moves approximately 1.8 million tons of coal annually from trucks or railcars to barges for shipment to power plants. Excessive spillage from an underground belt below the railcar dumper increased cleanup costs and maintenance headaches. This conveyor is 84 inches wide with an operating speed of 150 fpm.
Martin® Self Adjusting Skirting Maintains Effective Seal Without Maintenance
A salt plant in Ohio was looking to upgrade their skirtboard sealing systems. The existing slab rubber skirting was in bad repair and leaking material. With less than two inches (51 mm) of free belt area on each side of the loading zone, the conveyor had very limited amount of space available for installation of a sealing system.
Martin® Self Adjusting Skirting Faster And Easier To Install
At cement company, abrasive clinker would rapidly wear out the skirtboard sealing strips, creating a severe spillage problem at the conveyor’s loading zone. The sealing system required replacement every three weeks. Martin Engineering provided “Personalized Performance” by tailoring the Martin® Self Adjusting Skirting to provide improved corrosion resistance while remaining within the customer’s budget.
We're Here to Help
+60 3 7651 7949
Level 15.01, 1 First Avenue,
2A, Dataran Bandar Utama,
47800 Petaling Jaya,
Selangor, Malaysia
